by Alexander Judson | Nov 16, 2023 | EE 201, ENGR 200, Honors Projects
Good afternoon everyone, Over the course of the fall 2023 semester, a partner and I took on the task of building a hydroelectric generator from the ground up, with the exception of the motor itself. In this post, I will be documenting and displaying the entire process...
by Alexander Judson | Dec 15, 2022 | ENGR-199, Final Projects
Hello everybody, At the beginning of the fall 2022 semester, all of the students in section 70 of ENGR 199 were given a problem that we would be working on over the semester to solve. The problem that we were given was “how to put out a flame that happens to be...
by Alexander Judson | Nov 30, 2022 | ENGR-199
Hello everybody, Over the past few days, I have worked to create a wheel that I can use with my stepper motor for the final project which will be detailed in another post at a later date. In doing this, I first went through the process of designing the hub for the...
by Alexander Judson | Nov 23, 2022 | ENGR-199
Hello everybody, During the past week, I put together a circuit that can detect and put out a small flame, using components given within our Arduino kits. I used an infrared sensor to detect the flame, a fan to extinguish the flame, and a relay to connect the fan to...
by Alexander Judson | Nov 7, 2022 | ENGR-199
Hello everybody, Today I’ve set up a system that imitates the function of sliding doors that open when approached, ie doors at Walmart, Ingles, Publix, etc. Inside this system, I have included a standard (non-continuous) servo that turns from 0-180 degrees whenever an...
by Alexander Judson | Nov 2, 2022 | ENGR-199
Hello everybody, Over the past week, I have been designing a mounting bracket for some stepper motors that I plan on using for my final project: a robot that will automatically put out a fire. In doing this, I used reference imagery to design the bracket in Onshape,...
Recent Comments