by Andrew McCoy | Mar 25, 2024 | Electronic Drafting/Frabication
In this project I had to take a schematic provided to us by the professor and make a PCB design from it, to be printed and soldered. This project would result in a in-house version of an Ardunio processor. TBC
by Andrew McCoy | Mar 25, 2024 | Engineering Practice and Principles
The Bouncy Ball Mini Project was a sub part of a larger project for my ENGR 200 course during spring 2024. In this project we had to a bouncy ball move from the starting point which was the end of a large OSB board to a pit in the middle of the board. During this...
by Andrew McCoy | Mar 25, 2024 | Electronic Drafting/Frabication
In this project I had to solder a binary counter from a PCB board, and schematic provided by the class professor. This project was desgined to help foster soldering skills for new students, but also show the challanges of soldering on raw copper boards, and prepare...
by Andrew McCoy | Mar 18, 2024 | Electronic Drafting/Frabication
In this project I was tasked with desinging a circuit board for a Pulse Width Modulation system that could control the speed and direction of a DC Motor with a 555 timer. We were given wire schematic on paper, and I had the make the same schematic on the Autodesk...
Recent Comments