Final Project (fire fighting)

My final project for this class was to make a robot that could turn left and or right by sensing walls and a flame to put it out. This robot had to sense the track’s walls, which could be flipped to the left and right to test for both left and right turns. Said...

Flame sensor

I made a flame sensor, but it can also detect light, and the fan it is attached to will turn on once the light or “flame” is detected. The light will come from my phone flashlight, and the fan will cut on when it is directly in front of the sensor. I tried...

Motor hub and wheel

I went on Onshape, started in the top plane, and created the sketch of the motor hub with the dimensions below. I made a small circle, put two lines close to the circle’s edge, and removed the spare parts to make the part that goes over the stepper motor. Then I...

Motor Mount

I made this L-bracket mount for the 28BYJ-48 Stepper Motor in my Arduino kit. To create the bracket, I went on Onshape, started on the front plan in the first quadrant, and sketched an “L” shape. Then I started making the dimensions (25 mm long and 2 mm...