by Deasia McQueen | May 9, 2023 | Microprocessor Projects
My final project for this class was to make a robot that could turn left and or right by sensing walls and a flame to put it out. This robot had to sense the track’s walls, which could be flipped to the left and right to test for both left and right turns. Said...
by Deasia McQueen | May 9, 2023 | Microprocessor Projects
I made a flame sensor, but it can also detect light, and the fan it is attached to will turn on once the light or “flame” is detected. The light will come from my phone flashlight, and the fan will cut on when it is directly in front of the sensor. I tried...
by Deasia McQueen | May 9, 2023 | Microprocessor Projects
I went on Onshape, started in the top plane, and created the sketch of the motor hub with the dimensions below. I made a small circle, put two lines close to the circle’s edge, and removed the spare parts to make the part that goes over the stepper motor. Then I...
by Deasia McQueen | May 9, 2023 | Microprocessor Projects
I made way for my ultrasonic sensor to control my servo motor. And simulate an automatic door opening and closing based on whether the sensor feels an object is near. This is a servo motor. And this is an ultrasonic sensor. And here is the video below that has me...
by Deasia McQueen | May 9, 2023 | Microprocessor Projects
I made this L-bracket mount for the 28BYJ-48 Stepper Motor in my Arduino kit. To create the bracket, I went on Onshape, started on the front plan in the first quadrant, and sketched an “L” shape. Then I started making the dimensions (25 mm long and 2 mm...
Recent Comments