{"id":564,"date":"2023-05-09T14:55:26","date_gmt":"2023-05-09T14:55:26","guid":{"rendered":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/?p=564"},"modified":"2023-05-09T14:55:26","modified_gmt":"2023-05-09T14:55:26","slug":"motor-hub-and-wheel","status":"publish","type":"post","link":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/2023\/05\/09\/motor-hub-and-wheel\/","title":{"rendered":"Motor hub and wheel"},"content":{"rendered":"<p style=\"text-align: left;\">I went on Onshape, started in the top plane, and created the sketch of the motor hub with the dimensions below. I made a small circle, put two lines close to the circle&#8217;s edge, and removed the spare parts to make the part that goes over the stepper motor. Then I made a second circle to go around. The 1st one hub would stay on the stepper motor. The last thing I did was extrude the hub. After that, I went to the right plane to make the 3 mm holes on each side of the hub, starting with a straight line down the middle on that side and drawing a circle with a diameter of 3mm, and readjusted the initial extrusion by 2 mm. I then made a second extrusion for the 3mm hole to come out on both sides of the hub.<\/p>\n<p style=\"text-align: left;\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-531\" src=\"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-content\/uploads\/sites\/1755\/2023\/04\/Screenshot-2023-04-30-014822-300x155.png\" alt=\"\" width=\"300\" height=\"155\" \/> <img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-532\" src=\"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-content\/uploads\/sites\/1755\/2023\/04\/Screenshot-2023-04-30-095723-300x171.png\" alt=\"\" width=\"300\" height=\"171\" \/> <img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-534\" src=\"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-content\/uploads\/sites\/1755\/2023\/04\/Screenshot-2023-04-30-100313-300x163.png\" alt=\"\" width=\"300\" height=\"163\" \/> <img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-535\" src=\"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-content\/uploads\/sites\/1755\/2023\/04\/Screenshot-2023-04-30-100740-300x206.png\" alt=\"\" width=\"300\" height=\"206\" \/><\/p>\n<p>When it came to the wheel, I used the exact measurement my partner used for their wheel, which was for the wheel to be 120mm in diameter and 5 mm thick. I also put shapes on my wheel to make it look nice by adding ellipses and small circles to give it a flower shape. To add the ellipses and the smaller circles, I made a straight line from the center of the circle to get a radius of 60mm, and on the same line, I made the first ellipse the center of the said ellipse would be on the line. I then clicked the pattern tab and played around until I 8 even spaced ellipses. And I did the same thing with the circles starting with the bigger one between every ellipse, so there were 8. I kept readjusting the diameter of the circles to make them look presentable in the end. Each bigger circle had a diameter of about 12 mm, with the eight smaller ones having a diameter of 6mm before lastly extruding the wheel and the bottom of the hub so that they were connected to be 5 mm.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-536\" src=\"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-content\/uploads\/sites\/1755\/2023\/04\/Screenshot-2023-04-30-101612-300x183.png\" alt=\"\" width=\"300\" height=\"183\" \/> <img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-537\" src=\"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-content\/uploads\/sites\/1755\/2023\/04\/Screenshot-2023-04-30-102259-300x197.png\" alt=\"\" width=\"300\" height=\"197\" \/><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-538\" src=\"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-content\/uploads\/sites\/1755\/2023\/04\/Screenshot-2023-04-30-102430-300x194.png\" alt=\"\" width=\"300\" height=\"194\" \/><\/p>\n<p>This was the result after 3D printing it with a Prusa mini.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-539\" src=\"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-content\/uploads\/sites\/1755\/2023\/04\/Picture1.jpg\" alt=\"\" width=\"216\" height=\"288\" \/><\/p>\n","protected":false},"excerpt":{"rendered":"<p>I went on Onshape, started in the top plane, and created the sketch of the motor hub with the dimensions below. I made a small circle, put two lines close to the circle&#8217;s edge, and removed the spare parts to make the part that goes over the stepper motor. Then I made a second circle [&hellip;]<\/p>\n","protected":false},"author":1973,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-564","post","type-post","status-publish","format-standard","hentry","category-microprocessors"],"_links":{"self":[{"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/posts\/564","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/users\/1973"}],"replies":[{"embeddable":true,"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/comments?post=564"}],"version-history":[{"count":1,"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/posts\/564\/revisions"}],"predecessor-version":[{"id":565,"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/posts\/564\/revisions\/565"}],"wp:attachment":[{"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/media?parent=564"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/categories?post=564"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/portfolio.wcu.edu\/dkmcqueen1\/wp-json\/wp\/v2\/tags?post=564"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}