by John Clay | Dec 14, 2022 | ENGR 199, Final Project, Fire Fighting Robot
For the final project in my first-year engineering class, we were tasked with building a robot capable of solving a short maze, sensing a flame, and then putting it out. I worked with Josh Harris on this project. We were expected to each design and 3D-print wheels and...
by John Clay | Nov 30, 2022 | ENGR 199, Fire Fighting Robot
As part of the final project for my first-year engineering class, I had to design one of the wheels for the fire-fighting robot. The wheel had to fit on a 28BYJ-48 stepper motor and have a hole on the side for a 3 mm screw. I used this image from Cookie robotics for...
by John Clay | Nov 18, 2022 | ENGR 199, Fire Fighting Robot
For part of the final project for my first-year engineering class, I had to design a circuit that would extinguish a flame upon sensing it. To accomplish this task, I used a flame sensor in connection to a relay and a fan. The flame sensor can detect both flames and...
by John Clay | Nov 3, 2022 | ENGR 199, Fire Fighting Robot
For my first-year engineering class, I had to design and 3D print a mount for a 28BYJ-48 Stepper Motor to be used in the final project. I imported and scaled an image of the schematics into OnShape and used it to design the mount. The image of the motor I used is from...
