by Moises Aragon | Mar 27, 2025 | Microprocessor Projects
Due to unforeseen circumstances the aircraft project went from 4 members to 3 and as the wing lead I will pick up on the fuselage portion for the Taylorcraft b. The modeling portion will be working based on the wing model and plane plan that was used for the wing...
by Moises Aragon | Mar 26, 2025 | Engineering Models, Engineering Projects
The wing is crusial for gettign lift having eading edge, trailing edge, spars, rib and ailerons for the current class we where only required to model the spars ribs trailing arms railing edge and leading edge on cad the red would be made in person since the...
by Moises Aragon | Mar 12, 2025 | Microprocessor Projects
This blog will be going over my Tiny House project for one of my projects done for the Academy of Engineering at Southern Lee High School, date being Dec 9, 2020 I had already designed this project on the school desktop earlier in the year since this was a year long...
by Moises Aragon | Mar 12, 2025 | Engineering Models, Engineering Projects
This blog will be going over my Solar Oven Design project for one of my projects done for the Academy of Engineering at Southern Lee High School, date being May 11, 2023 Solar Oven Design: Harnessing Sunlight to Heat Water During my fourth year in my high school...
by Moises Aragon | Mar 11, 2025 | Engineering Models
The SolidWorks Practice Exam is a crucial step for engineers and students preparing for CSWA (Certified SolidWorks Associate) or CSWP (Certified SolidWorks Professional) certification. This exam challenges your ability to efficiently create parametric models, apply...
by Moises Aragon | Mar 5, 2025 | Engineering Models, Engineering Projects
The primary goal is to replicate the Taylorcraft B, which is an aircraft from the golden age of aviation and was introduced in 1938. In our project, our goal was to make and design the plane at 1/15 scale and make it operational from a controller. We will be using...
by Moises Aragon | Jan 18, 2025 | Baja
The primary goal of our final project was to design and construct a roll cage for an off-road vehicle as outlined by the 2025 SAE Baja competition. Our objective was to develop a lightweight yet durable frame that could withstand significant obstacles over prolonged...
by Moises Aragon | Dec 16, 2023 | Engineering Projects
The objective of the final project was to use what we learned about all semester to create a robot that would drive itself through a maze that would detect and extinguish a flame. the maze was 2 squares that were 18x 18 that consisted of a maze of two left turns...
by Moises Aragon | Nov 29, 2023 | Microprocessor Projects
The following video shows the fan where we have to use C++ to code the Arduino to receive analog input from the sensor and output to the relay that controlled the fan to turn on and off. first I had to understand the way a relay works and its function and then I had...
by Moises Aragon | Nov 29, 2023 | Microprocessor Projects
The following video shows the servo motor where we have to use C++ to code the Arduino to receive input from the sensor and output to the servo to change directions. I had to connect the servo motor and the sensor to my Arduino. Made sure to connect them properly and...
