by Nathaniel Garrett | Nov 17, 2024 | ENGR 199 Projects
When the sensor is powered on it outputs a number between 0 and 1023, the phone light or flame makes the sensor output a lower number. Using an if statement, I coded the flame sensor to trigger the fans power source when it senses this light. The flame sensor works...
by Nathaniel Garrett | Nov 11, 2024 | ENGR 199 Projects
When designing the wheel I first had to make sure that the Hub fit on my stepper motor. My first print was too small so I changed the dimensions of the inner gap, making the hole 5.2mm in diameter when it was originally 5mm, and the height 3.1mm when it was originally...
by Nathaniel Garrett | Nov 11, 2024 | ENGR 199 Projects
The design for my motor mount used the same dimensions of my Professor’s model we did together in class. I used a 20% infill and Generic PLA filament. The printer I used was the Prusa Mk4 with the 0.4mm nozzle. The dimensions were designed to allow for some margin of...
Recent Comments