by Peyton Yarbrough | May 11, 2023 | Honors Projects, Intro to Engineering Projects
Design Process I started with a base project that I found online. I found it on Thingiverse, by a user who goes by the name Blayder. I was able to get a parts list and it helped me hit the ground running. I added a Piazzo and an Infrared Sensor to enhance the design....
by Peyton Yarbrough | May 1, 2023 | Intro to Engineering Projects
Design Process My partner and I were tasked with building and coding a robot that would solve a maze and put out a flame. The finished robot is shown in the image above. Motor Mount & Wheels Both my partner and I had to draw, and print, a mount that would secure a...
by Peyton Yarbrough | Apr 21, 2023 | Intro to Engineering Projects
Hubs In total I printed three iterations of the Motor Hub. I made the hole too small for the shaft to fit into hub for the first two iterations, so that is what I changed. The dimensions are as followed: ...
by Peyton Yarbrough | Apr 14, 2023 | Intro to Engineering Projects
The flame sensor is triggered when a light or heat is within a certain range. When the sensor is triggered the relay will flip and turn the fan on. The flame sensor is the red component shown in the picture to the right. The relay is the blue component shown in the...
Recent Comments